String

A String object has an arbitrary sequence of bytes, typically representing text or binary data. A String object may be created using String::new or as literals.

String objects differ from Symbol objects in that Symbol objects are designed to be used as identifiers, instead of text or data.

You can create a String object explicitly with:

• A string literal.

• A heredoc literal.

You can convert certain objects to Strings with:

• Method String.

Some String methods modify self. Typically, a method whose name ends with ! modifies self and returns self; often a similarly named method (without the !) returns a new string.

In general, if there exist both bang and non-bang version of method, the bang! mutates and the non-bang! does not. However, a method without a bang can also mutate, such as String#replace.

Substitution Methods

These methods perform substitutions:

• String#sub: One substitution (or none); returns a new string.

• String#sub!: One substitution (or none); returns self.

• String#gsub: Zero or more substitutions; returns a new string.

• String#gsub!: Zero or more substitutions; returns self.

Each of these methods takes:

• A first argument, pattern (string or regexp), that specifies the substring(s) to be replaced.

• Either of these:

  • A second argument, replacement (string or hash), that determines the replacing string.

  • A block that will determine the replacing string.

The examples in this section mostly use methods String#sub and String#gsub; the principles illustrated apply to all four substitution methods.

Argument pattern

Argument pattern is commonly a regular expression:

s = 'hello'
s.sub(/[aeiou]/, '*')# => "h*llo"
s.gsub(/[aeiou]/, '*') # => "h*ll*"
s.gsub(/[aeiou]/, '')# => "hll"
s.sub(/ell/, 'al')   # => "halo"
s.gsub(/xyzzy/, '*') # => "hello"
'THX1138'.gsub(/\d+/, '00') # => "THX00"

When pattern is a string, all its characters are treated as ordinary characters (not as regexp special characters):

'THX1138'.gsub('\d+', '00') # => "THX1138"

String replacement

If replacement is a string, that string will determine the replacing string that is to be substituted for the matched text.

Each of the examples above uses a simple string as the replacing string.

String replacement may contain back-references to the pattern’s captures:

• \n (n a non-negative integer) refers to $n.

• \k<name> refers to the named capture name.

See Regexp for details.

Note that within the string replacement, a character combination such as $& is treated as ordinary text, and not as a special match variable. However, you may refer to some special match variables using these combinations:

• \& and \0 correspond to $&, which contains the complete matched text.

• \' corresponds to $', which contains string after match.

• ` corresponds to $`, which contains string before match.

• \+ corresponds to $+, which contains last capture group.

See Regexp for details.

Note that \\ is interpreted as an escape, i.e., a single backslash.

Note also that a string literal consumes backslashes. See String Literals for details about string literals.

A back-reference is typically preceded by an additional backslash. For example, if you want to write a back-reference \& in replacement with a double-quoted string literal, you need to write "..\\&..".

If you want to write a non-back-reference string \& in replacement, you need first to escape the backslash to prevent this method from interpreting it as a back-reference, and then you need to escape the backslashes again to prevent a string literal from consuming them: "..\\\\&..".

You may want to use the block form to avoid a lot of backslashes.

Hash replacement

If argument replacement is a hash, and pattern matches one of its keys, the replacing string is the value for that key:

h = {'foo' => 'bar', 'baz' => 'bat'}
'food'.sub('foo', h) # => "bard"

Note that a symbol key does not match:

h = {foo: 'bar', baz: 'bat'}
'food'.sub('foo', h) # => "d"

Block

In the block form, the current match string is passed to the block; the block’s return value becomes the replacing string:

 s = '@'
'1234'.gsub(/\d/) {|match| s.succ! } # => "ABCD"

Special match variables such as $1, $2, $`, $&, and $' are set appropriately.

Whitespace in Strings

In class String, whitespace is defined as a contiguous sequence of characters consisting of any mixture of the following:

• NL (null): "\x00", "\u0000".

• HT (horizontal tab): "\x09", "\t".

• LF (line feed): "\x0a", "\n".

• VT (vertical tab): "\x0b", "\v".

• FF (form feed): "\x0c", "\f".

• CR (carriage return): "\x0d", "\r".

• SP (space): "\x20", " ".

Whitespace is relevant for these methods:

• lstrip, lstrip!: strip leading whitespace.

• rstrip, rstrip!: strip trailing whitespace.

• strip, strip!: strip leading and trailing whitespace.

String Slices

A slice of a string is a substring that is selected by certain criteria.

These instance methods make use of slicing:

• String#[] (also aliased as String#slice) returns a slice copied from self.

• String#[]= returns a copy of self with a slice replaced.

• String#slice! returns self with a slice removed.

Each of the above methods takes arguments that determine the slice to be copied or replaced.

The arguments have several forms. For string string, the forms are:

• string[index].

• string[start, length].

• string[range].

• string[regexp, capture = 0].

• string[substring].

string[index]

When non-negative integer argument index is given, the slice is the 1-character substring found in self at character offset index:

'bar'[0]       # => "b"
'bar'[2]       # => "r"
'bar'[20]      # => nil
'тест'[2]      # => "с"
'こんにちは'[4]  # => "は"

When negative integer index is given, the slice begins at the offset given by counting backward from the end of self:

'bar'[-3]         # => "b"
'bar'[-1]         # => "r"
'bar'[-20]        # => nil

string[start, length]

When non-negative integer arguments start and length are given, the slice begins at character offset start, if it exists, and continues for length characters, if available:

'foo'[0, 2]       # => "fo"
'тест'[1, 2]      # => "ес"
'こんにちは'[2, 2]  # => "にち"
# Zero length.
'foo'[2, 0]       # => ""
# Length not entirely available.
'foo'[1, 200]     # => "oo"
# Start out of range.
'foo'[4, 2]      # => nil

Special case: if start is equal to the length of self, the slice is a new empty string:

'foo'[3, 2]   # => ""
'foo'[3, 200] # => ""

When negative start and non-negative length are given, the slice beginning is determined by counting backward from the end of self, and the slice continues for length characters, if available:

'foo'[-2, 2]    # => "oo"
'foo'[-2, 200]  # => "oo"
# Start out of range.
'foo'[-4, 2]     # => nil

When negative length is given, there is no slice:

'foo'[1, -1]  # => nil
'foo'[-2, -1] # => nil

string[range]

When Range argument range is given, creates a substring of string using the indices in range. The slice is then determined as above:

'foo'[0..1]    # => "fo"
'foo'[0, 2]    # => "fo"

'foo'[2...2]   # => ""
'foo'[2, 0]    # => ""

'foo'[1..200]  # => "oo"
'foo'[1, 200]  # => "oo"

'foo'[4..5]    # => nil
'foo'[4, 2]    # => nil

'foo'[-4..-3]  # => nil
'foo'[-4, 2]   # => nil

'foo'[3..4]    # => ""
'foo'[3, 2]    # => ""

'foo'[-2..-1]  # => "oo"
'foo'[-2, 2]   # => "oo"

'foo'[-2..197] # => "oo"
'foo'[-2, 200] # => "oo"

string[regexp, capture = 0]

When the Regexp argument regexp is given, and the capture argument is 0, the slice is the first matching substring found in self:

'foo'[/o/] # => "o"
'foo'[/x/] # => nil
s = 'hello there'
s[/[aeiou](.)\1/] # => "ell"
s[/[aeiou](.)\1/, 0] # => "ell"

If argument capture is given and not 0, it should be either an capture group index (integer) or a capture group name (string or symbol); the slice is the specified capture (see Groups and Captures at Regexp):

s = 'hello there'
s[/[aeiou](.)\1/, 1] # => "l"
s[/(?<vowel>[aeiou])(?<non_vowel>[^aeiou])/, "non_vowel"] # => "l"
s[/(?<vowel>[aeiou])(?<non_vowel>[^aeiou])/, :vowel] # => "e"

If an invalid capture group index is given, there is no slice. If an invalid capture group name is given, IndexError is raised.

string[substring]

When the single String argument substring is given, returns the substring from self if found, otherwise nil:

'foo'['oo'] # => "oo"
'foo'['xx'] # => nil

What’s Here

First, what’s elsewhere. Class String:

• Inherits from class Object.

• Includes module Comparable.

Here, class String provides methods that are useful for:

• Creating a String

• Frozen/Unfrozen Strings

• Querying

• Comparing

• Modifying a String

• Converting to New String

• Converting to Non-String

• Iterating

Methods for Creating a String

• ::new: Returns a new string.

• ::try_convert: Returns a new string created from a given object.

Methods for a Frozen/Unfrozen String

• +@: Returns a string that is not frozen: self, if not frozen; self.dup otherwise.

• -@: Returns a string that is frozen: self, if already frozen; self.freeze otherwise.

• freeze: Freezes self, if not already frozen; returns self.

Methods for Querying

Counts

• length, size: Returns the count of characters (not bytes).

• empty?: Returns true if self.length is zero; false otherwise.

• bytesize: Returns the count of bytes.

• count: Returns the count of substrings matching given strings.

Substrings

• =~: Returns the index of the first substring that matches a given Regexp or other object; returns nil if no match is found.

• index: Returns the index of the first occurrence of a given substring; returns nil if none found.

• rindex: Returns the index of the last occurrence of a given substring; returns nil if none found.

• include?: Returns true if the string contains a given substring; false otherwise.

• match: Returns a MatchData object if the string matches a given Regexp; nil otherwise.

• match?: Returns true if the string matches a given Regexp; false otherwise.

• start_with?: Returns true if the string begins with any of the given substrings.

• end_with?: Returns true if the string ends with any of the given substrings.

Encodings

• encoding: Returns the Encoding object that represents the encoding of the string.

• unicode_normalized?: Returns true if the string is in Unicode normalized form; false otherwise.

• valid_encoding?: Returns true if the string contains only characters that are valid for its encoding.

• ascii_only?: Returns true if the string has only ASCII characters; false otherwise.

Other

• sum: Returns a basic checksum for the string: the sum of each byte.

• hash: Returns the integer hash code.

Methods for Comparing

• ==, ===: Returns true if a given other string has the same content as self.

• eql?: Returns true if the content is the same as the given other string.

• <=>: Returns -1, 0, or 1 as a given other string is smaller than, equal to, or larger than self.

• casecmp: Ignoring case, returns -1, 0, or 1 as a given other string is smaller than, equal to, or larger than self.

• casecmp?: Returns true if the string is equal to a given string after Unicode case folding; false otherwise.

Methods for Modifying a String

Each of these methods modifies self.

Insertion

• insert: Returns self with a given string inserted at a given offset.

• <<: Returns self concatenated with a given string or integer.

Substitution

• sub!: Replaces the first substring that matches a given pattern with a given replacement string; returns self if any changes, nil otherwise.

• gsub!: Replaces each substring that matches a given pattern with a given replacement string; returns self if any changes, nil otherwise.

• succ!, next!: Returns self modified to become its own successor.

• replace: Returns self with its entire content replaced by a given string.

• reverse!: Returns self with its characters in reverse order.

• setbyte: Sets the byte at a given integer offset to a given value; returns the argument.

• tr!: Replaces specified characters in self with specified replacement characters; returns self if any changes, nil otherwise.

• tr_s!: Replaces specified characters in self with specified replacement characters, removing duplicates from the substrings that were modified; returns self if any changes, nil otherwise.

Casing

• capitalize!: Upcases the initial character and downcases all others; returns self if any changes, nil otherwise.

• downcase!: Downcases all characters; returns self if any changes, nil otherwise.

• upcase!: Upcases all characters; returns self if any changes, nil otherwise.

• swapcase!: Upcases each downcase character and downcases each upcase character; returns self if any changes, nil otherwise.

Encoding

• encode!: Returns self with all characters transcoded from one given encoding into another.

• unicode_normalize!: Unicode-normalizes self; returns self.

• scrub!: Replaces each invalid byte with a given character; returns self.

• force_encoding: Changes the encoding to a given encoding; returns self.

Deletion

• clear: Removes all content, so that self is empty; returns self.

• slice!, []=: Removes a substring determined by a given index, start/length, range, regexp, or substring.

• squeeze!: Removes contiguous duplicate characters; returns self.

• delete!: Removes characters as determined by the intersection of substring arguments.

• lstrip!: Removes leading whitespace; returns self if any changes, nil otherwise.

• rstrip!: Removes trailing whitespace; returns self if any changes, nil otherwise.

• strip!: Removes leading and trailing whitespace; returns self if any changes, nil otherwise.

• chomp!: Removes trailing record separator, if found; returns self if any changes, nil otherwise.

• chop!: Removes trailing newline characters if found; otherwise removes the last character; returns self if any changes, nil otherwise.

Methods for Converting to New String

Each of these methods returns a new String based on self, often just a modified copy of self.

Extension

• *: Returns the concatenation of multiple copies of self,

• +: Returns the concatenation of self and a given other string.

• center: Returns a copy of self centered between pad substring.

• concat: Returns the concatenation of self with given other strings.

• prepend: Returns the concatenation of a given other string with self.

• ljust: Returns a copy of self of a given length, right-padded with a given other string.

• rjust: Returns a copy of self of a given length, left-padded with a given other string.

Encoding

• b: Returns a copy of self with ASCII-8BIT encoding.

• scrub: Returns a copy of self with each invalid byte replaced with a given character.

• unicode_normalize: Returns a copy of self with each character Unicode-normalized.

• encode: Returns a copy of self with all characters transcoded from one given encoding into another.

Substitution

• dump: Returns a copy of self with all non-printing characters replaced by \xHH notation and all special characters escaped.

• undump: Returns a copy of self with all \xNN notation replace by \uNNNN notation and all escaped characters unescaped.

• sub: Returns a copy of self with the first substring matching a given pattern replaced with a given replacement string;.

• gsub: Returns a copy of self with each substring that matches a given pattern replaced with a given replacement string.

• succ, next: Returns the string that is the successor to self.

• reverse: Returns a copy of self with its characters in reverse order.

• tr: Returns a copy of self with specified characters replaced with specified replacement characters.

• tr_s: Returns a copy of self with specified characters replaced with specified replacement characters, removing duplicates from the substrings that were modified.

• %: Returns the string resulting from formatting a given object into self

Casing

• capitalize: Returns a copy of self with the first character upcased and all other characters downcased.

• downcase: Returns a copy of self with all characters downcased.

• upcase: Returns a copy of self with all characters upcased.

• swapcase: Returns a copy of self with all upcase characters downcased and all downcase characters upcased.

Deletion

• delete: Returns a copy of self with characters removed

• delete_prefix: Returns a copy of self with a given prefix removed.

• delete_suffix: Returns a copy of self with a given suffix removed.

• lstrip: Returns a copy of self with leading whitespace removed.

• rstrip: Returns a copy of self with trailing whitespace removed.

• strip: Returns a copy of self with leading and trailing whitespace removed.

• chomp: Returns a copy of self with a trailing record separator removed, if found.

• chop: Returns a copy of self with trailing newline characters or the last character removed.

• squeeze: Returns a copy of self with contiguous duplicate characters removed.

• [], slice: Returns a substring determined by a given index, start/length, or range, or string.

• byteslice: Returns a substring determined by a given index, start/length, or range.

• chr: Returns the first character.

Duplication

• to_s, $to_str: If self is a subclass of String, returns self copied into a String; otherwise, returns self.

Methods for Converting to Non-String

Each of these methods converts the contents of self to a non-String.

Characters, Bytes, and Clusters

• bytes: Returns an array of the bytes in self.

• chars: Returns an array of the characters in self.

• codepoints: Returns an array of the integer ordinals in self.

• getbyte: Returns an integer byte as determined by a given index.

• grapheme_clusters: Returns an array of the grapheme clusters in self.

Splitting

• lines: Returns an array of the lines in self, as determined by a given record separator.

• partition: Returns a 3-element array determined by the first substring that matches a given substring or regexp,

• rpartition: Returns a 3-element array determined by the last substring that matches a given substring or regexp,

• split: Returns an array of substrings determined by a given delimiter – regexp or string – or, if a block given, passes those substrings to the block.

Matching

• scan: Returns an array of substrings matching a given regexp or string, or, if a block given, passes each matching substring to the block.

• unpack: Returns an array of substrings extracted from self according to a given format.

• unpack1: Returns the first substring extracted from self according to a given format.

Numerics

• hex: Returns the integer value of the leading characters, interpreted as hexadecimal digits.

• oct: Returns the integer value of the leading characters, interpreted as octal digits.

• ord: Returns the integer ordinal of the first character in self.

• to_i: Returns the integer value of leading characters, interpreted as an integer.

• to_f: Returns the floating-point value of leading characters, interpreted as a floating-point number.

Strings and Symbols

• inspect: Returns copy of self, enclosed in double-quotes, with special characters escaped.

• to_sym, intern: Returns the symbol corresponding to self.

Methods for Iterating

• each_byte: Calls the given block with each successive byte in self.

• each_char: Calls the given block with each successive character in self.

• each_codepoint: Calls the given block with each successive integer codepoint in self.

• each_grapheme_cluster: Calls the given block with each successive grapheme cluster in self.

• each_line: Calls the given block with each successive line in self, as determined by a given record separator.

• upto: Calls the given block with each string value returned by successive calls to succ.